Skip to content
Cheam Sardis: Countertops, Cabinetry, Renovations

Countertops

Quartz countertops in Chilliwack

Quartz is an engineered stone that holds its colour, resists stains and doesn't need regular sealing. We help Chilliwack homeowners choose it, plan it around their cabinets and fit it properly.
A blue shaker island with a white marble-look quartz top.
After: After: the same kitchen with a new white quartz island and countertops.
Before: Before: a kitchen with dark cherry cabinets and a dark countertop.
Before and after, same viewpoint
A real job: the same cherry cabinets, with a new white quartz island and countertops

01

What quartz is, and why people choose it

Quartz countertops are made mostly from ground natural quartz bound with resins and pigments, then formed into slabs. Because the slab is engineered, its colour and pattern are consistent from one end to the other, which suits long runs and large islands.

The surface is non-porous. Coffee, wine and cooking oil sit on top rather than soaking in, and it doesn't need the regular sealing that many natural stones do. For a busy kitchen, that low-maintenance character is usually the reason quartz ends up on the shortlist.

  • Non-porous surface that resists staining
  • No regular sealing needed
  • Consistent colour and pattern across the slab
  • Plain colours, soft veining and bold marble looks
  • Suits kitchens, islands, bathroom vanities and bar tops

02

What to know before you choose it

Quartz is hard-wearing, but it isn't indestructible. The resins in the slab can be marked or discoloured by high, direct heat, so a trivet under hot pots and pans is a good habit, and slow cookers or toasters that run hot are best set on a board.

Most quartz is also intended for indoor use, since long exposure to strong sunlight can affect some colours over time. If you're thinking about an outdoor kitchen or a very sunny spot, tell us early and we'll talk through what suits it.

Day to day, a soft cloth with warm water and mild soap is usually all it needs. Harsh or abrasive cleaners aren't necessary and are best avoided.

03

Colours, finishes and edges

Quartz comes in a wide range of looks, from quiet whites and greys to warmer tones and slabs that imitate marble veining. Finishes vary too: polished surfaces reflect light and feel classic, while matte or honed finishes are softer to the eye.

The edge profile matters more than people expect. A simple eased edge is clean and practical; other profiles add detail but can change how the counter feels to lean on. We'll show you samples and talk through how each one suits the room and the cabinetry below it.

04

How a quartz countertop project goes

Every project is a little different, but the shape of the work is usually the same.

  • A first conversation about the room, how you use it and what you have in mind
  • Looking at colours, finishes and edge profiles together
  • Measuring once the cabinets are in place and level, so the counter fits what's really there
  • Fabrication of the slab to the measurements, including cut-outs for the sink and cooktop
  • Installation and a final walk-through of the finished surface

05

One team for the cabinets, the counter and the room

A countertop sits on cabinetry and meets walls, appliances and backsplashes, so most problems happen at the edges. Cheam Sardis brings together Cheam Countertops and Cabinets, which handles cabinetry and surfaces, and Sardis Contracting, which handles the renovation around them.

If you only need new quartz countertops, that's a complete project on its own. If the counters are part of a bigger kitchen change, planning the cabinets, surfaces and room in one conversation means heights, overhangs and openings line up the way they should.

06

Where quartz works well

Kitchens are the obvious place, and islands in particular, where a single consistent slab can run the full length without a busy pattern fighting the room. Quartz is equally at home on bathroom vanities, where its resistance to toothpaste, makeup and hard water spots keeps the top looking clean.

It also works for bar tops, laundry rooms and built-in desks. Because the slab is engineered, matching a vanity top to a kitchen counter, or a backsplash to the counter below it, is usually easier than with natural stone.

Where a sink is mounted under the counter, the edge of the cut-out is polished so it can be seen and touched. Faucet holes, cooktop openings and outlets in an island are planned before fabrication, so it helps to have your sink, faucet and appliances chosen early.

07

Quartz, granite or laminate?

Quartz sits between laminate and natural stone for many people. It feels like stone and wears well, without the regular sealing granite usually needs, and with more consistency from slab to slab. Laminate costs less and offers more patterns; granite gives you a one-of-a-kind slab. If you're undecided, we'll put samples side by side and talk through how each would live in your home.

08

Areas we serve

We work with homeowners from Chilliwack across the Fraser Valley, in the areas listed below. If you're in a nearby Fraser Valley community, ask us and we'll let you know. Many people start with a photo of their current kitchen and a rough idea of the colour they like; that's plenty for a first conversation.

  • Chilliwack, including Sardis, Vedder, Promontory, Yarrow, Rosedale and Greendale
  • Abbotsford and Mission
  • Langley and Aldergrove
  • Agassiz and Harrison Hot Springs
  • Hope

→ / Real jobs

Countertop jobs by Cheam Sardis.

  • A blue shaker island under a white marble-look quartz top.
    Marble-look quartz on a blue island
  • An island with an undermount sink in a marble-look countertop.
    Marble-look island with sink
  • A white island with bold grey veining and black hardware.
    Bold-veined island
  • A bathroom vanity top with a white vessel sink and black faucet.
    Vanity top, vessel sink
  • A large white island countertop in a bright kitchen.
    Big white island
  • A white veined island in a kitchen with wood cabinets.
    New top, original cabinets

? / Questions

Plain answers.

Is quartz cheaper than granite?

It depends on the specific slab, the size of the job and the details like edges and cut-outs. Both materials range widely, so we don't publish prices. Tell us what you have in mind and we can compare options for your project.

Does quartz need sealing?

No. Quartz is non-porous, so it doesn't need the regular sealing that many natural stones do. Wiping it down with warm water and mild soap is usually enough.

Can hot pans or a toaster go on quartz?

It's best not to. High, direct heat can mark or discolour the resins in quartz. Use a trivet for hot pots and pans, and a board under appliances that run hot.

Which quartz brands do you carry?

The material range for the combined company is being confirmed. Ask us about the colours or brands you've seen and we'll tell you what's available.

How long does it take from measuring to installation?

It varies with the slab you choose and the rest of the project, so we don't give a timeline before we understand the job. Once we do, we'll explain each step and when it happens.

Start

Quartz countertops in Chilliwack. Free quote, no strings attached.